Magnetic Car Phone Holder | 360 Rotation Vent Mount, YD-TP01

A magnetic car air-vent phone holder with 360-degree rotation, eagle-beak hook and telescopic pole. ABS+PC housing, N-grade magnet, 60 g. No charging function — holder only. Private-mold SUNDA tooling.

Model YD-TP01
Type Magnetic vent phone holder
Mount Eagle-beak hook, telescopic pole
Rotation 360 degrees
Material ABS + PC, N-grade magnet
Weight 60 g
Charging No — holder only
MOQ (stock) 10 pcs
MOQ (OEM/ODM) 500 pcs per version

A magnetic vent holder that locks the phone in one touch

This is the SUNDA SUNDAREE YD-TP01 magnetic car phone holder. It mounts on the air vent, holds the phone by magnetic adsorption, and rotates 360 degrees on a universal ball joint so the screen can be set to any angle. There is no charging function — it is a holder, not a wireless charger — which keeps the part simple, light and cheap, and leaves the charging port free for a cable if one is needed.

The housing is ABS plus PC, the magnet is an N-grade ring strong enough to hold a phone steady on rough road, and the clip that grips the vent uses an eagle-beak hook design with a telescopic pole. The whole unit weighs 60 grams. It is a private-mold part, made on SUNDA tooling in Shenzhen.

What you are buying

Magnetic one-handed adsorption

The phone attaches to the holder by magnetic adsorption. There is no clamp to squeeze, no arm to release — the phone sits against the magnet ring and stays. One hand, one motion. The magnet is strong enough to hold a phone in landscape for navigation or portrait for a call, and the phone pulls free when lifted.

360-degree universal ball joint

Behind the magnet ring is a universal ball joint that rotates a full 360 degrees, so the phone can be tilted to any angle the vent position allows. The joint is tensioned by a knurled nut on the back of the housing, loosened to adjust and tightened to lock.

Eagle-beak hook on a telescopic pole

The vent clip is an eagle-beak hook — a curved jaw that wraps behind the vent louver so the holder cannot pull off upward. The pole telescopes to set the reach from the louver to the magnet face, which adapts the holder to deep and shallow vent housings alike.

SUNDA SUNDAREE magnetic car phone holder mounted on an air vent with strong magnetic adsorption holding an iPhoneOne-handed operation automatic adsorption: SUNDA SUNDAREE magnetic vent phone holder attaching to an iPhone with navigation map openUniversal ball 360 degree rotation diagram of the SUNDA SUNDAREE magnetic car vent phone holder showing horizontal and vertical tilt

The holder mounted on an air vent with a phone attached, one-handed magnetic adsorption in action, and the 360-degree rotation diagram showing tilt angles.

Full specifications

SpecificationValue
Model numberYD-TP01
TypeMagnetic, adjustable car phone holder
MountCar air vent clip — eagle-beak hook, telescopic pole
Rotation360 degrees on universal ball joint
Housing materialABS + PC
MagnetN-grade magnetic ring
ColourSilver Grey
Weight60 g
Charging functionNo — holder only, charging port stays free
LogoCustomized logo (OEM accepted)
BrandSUNDAREE
Private moldYes — SUNDA own tooling
Place of originGuangdong, China
UseCar phone holder — navigation, calls, media
MOQ (stock)10 pieces
MOQ (OEM/ODM)500 pieces per version
Imitation eagle beak hook design: SUNDA magnetic phone holder with telescopic pole and anti-drop hook grasping air outlet finsInstallation steps diagram for the SUNDA magnetic vent phone holder: loosen nut, rotate 360 degrees, tighten tail clip on outlet bladesClose-up of the SUNDA SUNDAREE magnetic ring on the vent phone holder with ABS plus PC housing and magnet array

The eagle-beak hook design with telescopic pole, the installation steps diagram, and a close-up of the magnetic ring on the ABS+PC housing.

Why buyers add it to the range

  • Simple, light, cheap. No charging coil, no cable, no electronics to fail. The holder does one job — hold the phone — and weighs 60 g doing it.
  • One-handed operation. Magnetic adsorption means the phone goes on and comes off without a second hand. That matters for drivers who use the phone for navigation and want it mounted, not held.
  • Fits most vent louvers. The eagle-beak hook and telescopic pole adapt to deep and shallow vent housings, so the same part fits across vehicle models.
  • Private mold, OEM branding. The housing is SUNDA tooling, so body colour, logo, packaging and manual can be produced to your artwork on a branded run of 500 pcs.

OEM and ODM options

The YD-TP01 holder is built on SUNDA’s own tool, so a branded order is a production run rather than a moulding project. Body colour, logo print, the marking on the housing, the retail packaging and the language of the manual are all produced to your artwork. Send the version, the destination market and the quantity per run, and the sales team will confirm unit pricing, the certification documents for that market and the production schedule.

Frequently asked questions about the SUNDA SUNDAREE magnetic phone holder

Does this holder charge the phone?

No. It is a holder only — there is no charging coil, no cable, no input. The phone’s charging port stays free, so a separate USB-C cable can be run to a car charger if charging is needed. For a holder that also charges wirelessly, see the SUNDA wireless car charger mount.

Will the magnet hold a heavy phone with a case?

The magnet is an N-grade ring rated to hold phones in the weight range of current handsets. A thick case or a PopSocket between the phone and the magnet will reduce the hold. For heavy phones or thick cases, the N52 magnetic car mount uses a stronger magnet.

Will it fit my car’s air vent?

The eagle-beak hook and telescopic pole are designed to fit the standard horizontal and vertical louver vents found on most vehicles. Very deep vent housings may need the pole extended; very shallow ones may need it shortened. The pole adjusts without tools.

Can the angle be locked after adjustment?

Yes. The universal ball joint is tensioned by a knurled nut on the back of the housing. Loosen the nut to set the angle, tighten to lock. The phone stays put at the set angle until the nut is loosened again.

Can we have our own logo and packaging?

Yes. Body colour, logo, housing marking and retail packaging are produced to your artwork, and the manual can be printed in your market’s language. OEM and ODM branding runs start at 500 pcs per version, against a stock MOQ of 10 pcs.

What is the difference between this and the other SUNDA magnetic mounts?

The YD-TP01 is the vent-clip, eagle-beak hook version. The magnetic car vent phone holder is a lighter ABS ring version; the zinc alloy magnetic car mount is a heavier double-lock version; and the foldable magnetic car mount uses a nano-suction dashboard base. The full range sits under mobile phone holders.

Get a wholesale quote

The SUNDA SUNDAREE YD-TP01 magnetic car phone holder is built on our own tooling, so the housing colour, the logo print and the retail packaging can all be set to your brief. Stock models start from 10 pcs; OEM and ODM branding runs start at 500 pcs. Tell us the version you want, the market you are selling into and the quantity per run, and we will come back with unit pricing, the certification documents for that market, packing options and the current production schedule. Contact the SUNDA sales team for samples and lead time.

Scroll to Top

Get a Quote

Tell us what you need — Our team replies with price, MOQ and lead time within 2 hours, email: sales@lsunda.com, whatsapp: 8613510902223