The retractable car charger market got loud this year. Walk any trade show floor in 2026 and you saw it. Buyers crowded the booths asking for one thing: a charger that does not look like every other black brick on the shelf. Generic no longer sells. SUNDA watched inquiry volume climb hard this season, and nearly all of it pointed at differentiated, feature-led designs rather than plain ports.
So this guide gives you the full picture. You will see why retractable chargers are moving fast, which specs actually decide a sale, and what SUNDA’s newest models put on the table. Real numbers. Real products. The kind of detail an importer or brand owner needs before placing an order.
Why Retractable Car Chargers Are Selling Fast Right Now
Start with the pain. Loose cables tangle around the gearstick, slide into the footwell, and fray at the connector. Every driver knows the mess. A retractable car charger fixes it with a coiled cable that pulls out and springs back clean.
That one change shifts the whole feel of the product. It reads as premium. It looks tidy on a dashboard. And it gives your listing a feature a plain charger cannot match on photos alone.
The numbers moved too. A few years ago, two ports and 36W felt fine for a mid-range unit. Not anymore. Three ports and 99W is now the floor buyers expect in that tier, and anything below it reads as entry-level. SUNDA’s retractable cable car charger line was built around that new baseline. Buyers noticed.
What Specs Actually Matter to End Users
Specs sell the product after the design pulls the eye. Four of them carry most of the weight. Get these right and the rest is detail.
Charging speed. This is the first question every buyer gets from their own customers. PD 30W fast charging covers nearly every current phone at full speed, and a 99W total output spreads real power across three ports at once.
Port count. Three ports let a driver and two passengers charge together. That matters for families and rideshare drivers.
Cable length. Here is a detail most factories get wrong. Too short and the cable will not reach the back seat. Too long and it defeats the clean retractable look. SUNDA settled on 90 cm per cable, which hits the sweet spot for front and rear reach.
Compatibility. USB-A for older devices, USB-C for current phones, and PD for fast charging. All three in one unit.
Here is how a plain charger stacks up against a 99W retractable unit.
| Feature | Basic car charger | 99W retractable charger |
|---|---|---|
| Ports | 1 to 2 | 3 |
| Total output | 18W to 36W | 99W |
| PD fast charging | Often none | PD 30W |
| Cable | Loose or none | 2 built-in, 90 cm each |
| Shelf appeal | Low | High |
The gap is not subtle. One competes on price. The other competes on value, and value holds its margin. SUNDA’s full car charger range spans both tiers, so you can match the product to your market.
CC108: The Retractable Car Charger Buyers Are Requesting Most
Picture a charger that sells your brand every time a passenger glances at it. That is the CC108. It solves a problem most chargers ignore. A charger sits in the car for years, so why waste that visibility?
The front face carries an LED soft screen. You print your own logo, brand pattern, or artwork straight onto that display. It is a retractable car charger with LED screen that doubles as a rolling billboard for your brand. Every ride, the passenger sees your mark lit up on the dash.
Now the specs that back it up:
- Two retractable cables, 90 cm each
- Three fast-charging ports total
- 99W total output
- PD 30W fast charging on the main port
This is a genuine 99W car charger, not a peak-only label. The LED screen is the hook, but the charging does the daily job without compromise.
Customization is where it gets interesting for buyers. The LED artwork is fully yours. Any design, any pattern, any logo. SUNDA charges a one-time custom LED design fee of 3,800 RMB, and the MOQ sits at 500 pcs. Buyers ask about that fee early, so there it is, stated plainly.
Who buys the CC108? Brand merchandise teams. Corporate gifting programs. Promotional product distributors. Anyone who wants the charger itself to carry a message, not just a cable. It is a custom car charger OEM product first and a charger second, and that framing is exactly why it sells. Send SUNDA your artwork and target volume to price a CC108 run.
CC113: When You Want Function Plus Experience
The CC108 is visual. The CC113 is sensory. Same core job, different end-user, and that difference opens a second price point for your catalog.
The CC113 adds two things a normal charger never touches. First, a built-in perfume diffuser. You choose the scent, or you customize your own, turning it into a perfume car charger that freshens the cabin while it charges. Second, a star projector. It casts an LED star pattern across the car ceiling, so the cabin gets an atmosphere after dark.
Fast charging still anchors the product. The retractable cables and the PD output do the real work. The perfume and the star projector car charger features sit on top as the reasons a shopper pays more.
That is the commercial point. Two extra value-adds make the CC113 hard to compare on price alone. A buyer cannot line it up against a plain charger and argue cost, because nothing plain does what it does. It fits lifestyle brands, car accessory retailers, and premium gifting ranges that live or die on standing out.
Both retractable models side by side, so you can quote one line for each.
| Model | Core platform | What the buyer pays extra for | MOQ |
|---|---|---|---|
| CC108 | Two 90 cm retractable cables, 3 ports, 99W, PD 30W | LED soft screen printed with your artwork (one-time design fee 3,800 RMB) | 500 pcs |
| CC113 | Same retractable fast-charging base | Built-in perfume diffuser plus star projector | 500 pcs |
Both models run through the same OEM quote, so you can price the two tiers together and compare the landed cost per unit.
SUNDA’s Two Industry-First Products
SUNDA’s R and D team pushed into two areas no competitor has reached yet. If you want a product your rivals cannot source anywhere, these are worth an inquiry.
Motorcycle charger with tire pressure detection. It mounts on a bike and monitors tire pressure while it charges. No other factory has brought this to market yet. For a motorcycle charger with tire pressure built in, SUNDA is first, and the motorcycle charger line is where it lives.
Car charger with TFT screen. The TFT display shows tire pressure and charging wattage in real time. It turns the charger into a small safety and performance dashboard. A TFT car charger like this gives a brand a story no spec sheet alone can tell.
SUNDA is keeping full specs under wraps until launch, so treat these as early-access products. If either fits your market, ask the team directly before competitors catch on.
How to Customize Your Car Charger with SUNDA
Sourcing a custom product should not feel like a maze. SUNDA runs a clear OEM/ODM path from first idea to bulk shipment. Here is how it goes.
You send artwork. SUNDA builds a sample. You approve of it. Then production runs. Three steps, no guessing.
For the CC108 LED screen, you supply your design and SUNDA prints it to the display. The one-time custom LED design fee is 3,800 RMB. Vector files work best, so send AI or EPS format for the cleanest print result. A raster file can work, but vector keeps the edges sharp at any size.
MOQ stays flexible at 500 pcs minimum, which is low enough for a brand testing a new product without a warehouse-sized commitment. Samples can be arranged before you commit to a full run, and the team confirms exact timing per project.
Housing customization goes beyond the screen. SUNDA supports private labeling on the product body, packaging, and logo, so the finished unit carries your brand end to end. You can read more about why buyers choose SUNDA for this kind of work, or start straight from the SUNDA homepage to see the full range. When your design is ready, request a quote from the SUNDA team with your model and target volume, and pricing comes back fast.
Sourcing Retractable Chargers for Your Market
SUNDA builds the CC108, the CC113 and the wider retractable range to order, with private labeling on housing, packaging and logo. Minimum order is 500 pcs per model, and unit pricing drops on larger runs.
Summary
Retractable chargers sell because they solve a visible problem and photograph well. The spec floor in 2026 is three ports, 99W total and PD 30W, with 90 cm cables long enough to reach the back seat. The CC108 adds a printed LED screen for brand work at a one-time 3,800 RMB design fee, the CC113 adds scent and a star projector for lifestyle ranges, and both start at 500 pcs. For anything your competitors cannot source yet, ask about the tire-pressure motorcycle charger and the TFT screen car charger before those launch publicly.
Ready to Stand Out on the Shelf?
Check the CC108 spec sheet, then send your model, volume and customization needs to the SUNDA team and you will have pricing to work from fast.
FAQ
What is the MOQ for SUNDA’s retractable car charger?
SUNDA sets the minimum order at 500 pcs per model. That floor applies to the CC108, the CC113, and the wider retractable range. It is low enough for a brand testing a new product, and it still includes custom logo and packaging options. For larger runs, unit pricing drops, so share your target volume when you request a quote.
Can I put my brand logo on the LED screen of the CC108?
Yes. The CC108 has an LED soft screen on its front face, and you print your own logo, brand pattern, or artwork directly onto it. Any design works. This is the feature that turns the charger into a brand marketing tool, because every passenger sees your mark lit on the dashboard during the ride.
How much does it cost to customize the LED screen design?
SUNDA charges a one-time custom LED design fee of 3,800 RMB for the CC108 screen artwork. You pay it once, not per unit. After that, your design is set for the production run. Buyers ask about this cost early, so factor it into your first-order budget alongside the 500 pcs minimum.
What is the charging speed of the CC108?
The CC108 delivers 99W total output across three ports, with PD 30W fast charging on the main port. That covers nearly every current phone at full speed, and it lets three devices charge at once. It is a genuine 99W car charger, with the LED screen added on top of real charging performance.
What makes the CC113 different from a standard car charger?
The CC113 adds a built-in perfume diffuser and a star projector to a fast-charging retractable base. The perfume freshens the cabin, and the projector casts an LED star pattern on the ceiling. A standard charger only moves power. The CC113 adds scent and ambiance, which is why it sells at a higher retail price point.
Does SUNDA support private labeling on the product housing?
Yes. SUNDA supports private labeling on the product body, the packaging, and the logo, not just the LED screen. The finished unit carries your brand from housing to box. This is a core part of the OEM/ODM service, and it applies across the retractable range and the wider car charger line.
What file format do I need to submit for custom artwork?
Send vector files for the best result, in AI or EPS format. Vector art keeps edges sharp at any print size, which matters for both the LED screen and any logo on the housing. A raster file can work in some cases, but vector is preferred. SUNDA’s team will confirm the exact spec once you share your design.
Does SUNDA have any new car charger models not yet available from competitors?
Yes. SUNDA’s R and D team has launched two industry-first products. One is a motorcycle charger with tire pressure detection. The other is a car charger with a TFT screen showing tire pressure and charging wattage in real time. Neither has reached competitors yet, so ask the team directly if you want a product no rival can source.
