M2 Magnetic Wireless Car Charger | 15W Qi Phone Holder with LED Light

The SUNDA M2 is a magnetic wireless car charger and phone holder in one body: a 64 mm Qi charging pad with a soft LED ambient ring, mounted on an air-vent clip through an adjustable ball joint. Drop a phone on it and the magnet array aligns it for charging without hunting for a cable, then the LED ring tells you at a glance that the coil is live. It is the accessory that pairs with any of our wired chargers — the M2 holds the phone, a car charger from our CC62 or CC53 ranges feeds it.

M2 magnetic car charger at a glance

M2 magnetic car charger: what you are buying

The mount itself: body, size and light

Everything mechanical about the M2 is in this row. The charging face is 64 mm across and 33 mm thick, which is small enough to sit behind a phone without blocking the windscreen and large enough to take the full magnet array. The ring around the edge is the LED ambient light; the same ring carries the laser marking (input 5V/2A, 9V/2A, 12V/2A max and 15W Max output) plus the CE and FCC marks, so the rating is printed on the product rather than only in the manual. Behind the pad the body tapers into the vent clip.

Fitted in the car: how it holds and charges

In use the M2 clips onto an air-vent louver and the ball joint lets you tilt the pad to the angle of the phone, portrait or landscape. The magnet array pulls the phone into place the moment you bring it close, and the cut-outs on the back of the pad let heat escape so the coil does not throttle on a long drive. The result is the same routine every trip: put the phone up, watch the ring light come on, drive.

Full specifications

Why buyers add the M2 to their range

• Two products in one SKU. A magnetic mount and a 15W Qi charger in a single retail box — one barcode instead of two, and a higher ticket than a plain holder.
• Reads well on a shelf and on video. The LED ring is the feature buyers notice first; it works in unboxing videos, in-store demos and on marketplaces where the thumbnail has to do the selling.
• Fits the phones people actually carry. MagSafe iPhones from the 12 series align directly; Android phones work with a magnetic ring or a MagSafe-compatible case. See the FAQ below for the honest version of this.
• Built for the car, not the desk. Vent clip with ball joint, cooling holes on the back, and a 33 mm body that does not crowd the dashboard.
• Custom logo from 10 pieces. Low enough to sample a colour or a print run before committing to a container.

OEM and ODM options

The M2 is a standard mould, so the fast route is a logo run: laser etching on the metal trim ring, silk-screen or pad printing on the body, your artwork on the retail box and your manual inside it. For larger programmes we can also discuss housing colour matching, private tooling and gift-box or blister presentation. If you need the M2 bundled with a wired charger, we usually pair it with a CC62 dual-port car charger so the box ships as a complete in-car kit.

Frequently asked questions about the M2 magnetic car charger

Does the M2 charge through the phone case?

Through a thin case, yes. Magnetic alignment is the limiting factor rather than the wireless signal: MagSafe cases and magnetic-ring cases hold properly, thick rugged cases without a magnet will either slip or fail to trigger charging. If your buyers use heavy cases, order the magnetic ring accessory with the charger.

Does it work with iPhone and with Android?

Qi is the standard, so both work. iPhones from the 12 series onwards align by themselves because the magnet ring is built in. Recent Android flagships need a magnetic ring sticker or a MagSafe-compatible case — that is the one thing worth putting on the product page in your own market.

What does the LED ring do?

It shows the state of the coil: the ambient ring lights up when the pad is powered and changes colour while a phone is charging. It is a soft glow rather than a lamp, so it does not wash out the cabin at night.

Why does the back have holes in it?

Wireless charging generates heat, and heat is what makes a charger slow down. The cooling holes on the back of the pad give that heat somewhere to go, so the M2 holds its charging rate on a long drive instead of throttling after twenty minutes.

Will it hold a phone over potholes?

The magnet array is sized to carry a normal phone plus a thin case, and the vent clip is the mechanical anchor. Very heavy phones in thick cases are the case where buyers should step up to a suction or dashboard mount — tell us the phone models you are targeting and we will confirm.

What is the MOQ, and can I put my logo on it?

MOQ is 10 pcs, and custom logos are accepted from that quantity. Laser etching on the trim ring and printing on the body are both available; send your artwork and we will confirm the method, the setup charge and the production schedule.

Do I need a separate car charger to power it?

The M2 takes a 5V/2A, 9V/2A or 12V/2A supply (12V/2A max). In most builds it is paired with a USB car charger — a 20W-or-higher port is what lets the pad reach its top tier — or hard-wired by your installer. Confirm the cable length and connector you need when you order and we will match it.

Can you supply test reports and drawings?

Yes. The unit carries CE and FCC marking, and 3D drawings plus dimensions can be issued for tooling or packaging checks on request. Our factory works to ISO 9001 with BSCI and SMETA social-compliance audits, and the sales team will send the current document set with your quote.

Related SUNDA products. If you are building a car-accessory range rather than a single SKU, the M2 sits alongside our wired lines: the CC62 car charger series (eight models from 30W to 96W, retractable-cable and dual-port bodies) and the CC53 car charger series (38W to 140W, including a 140W adapter that charges laptops). Buyers who want to mix the magnetic mount into a wider assortment should also look at the car charger category and the phone holder category.

Get a wholesale quote

The M2 is available with a custom logo, custom retail box and custom manual, and the housing colour can be matched to your brand line. Send us your target quantity, destination market and artwork and we will come back with unit pricing, packing options and the current production schedule. Contact the SUNDA sales team for samples, drawings and lead time.