Ring Magnetic Car Phone Mount | 360° Vent Clip Holder

The SUNDAREE ring mount is the volume ring-head vent holder in the SUNDA range: a lightweight ABS body with a branded ring face, a spring vent clip and a 360° rotating head, sold from ten pieces. It comes in black and silver grey, weighs 60 g, and takes handsets from 4 to 7 inch. This is the model that goes on a peg or in a blister next to a charging cable, and because it is a private mould it carries your logo instead of ours.

SUNDAREE ring mount at a glance

What you are buying with the SUNDAREE ring mount

The SUNDAREE ring head in black and silver grey

The body is a single ABS moulding at 60 g, which is light enough that the vent blade carries it without sagging but heavy enough to feel like a product rather than a novelty. The ring face is the branding surface, and the SUNDAREE print shown here is exactly the area your logo would occupy. Black and silver grey are both on the tooling; the silver unit takes a light-reflective finish that photographs well against a dark dashboard.

On the road: vent installation and viewing angles

Installation takes a few seconds: the clip closes on the vent louvre and the ring is then angled by hand. The 360° head lets one mount serve portrait navigation and landscape mapping, and because the phone is held on the vent rather than on the dashboard glass, it stays in the driver’s eyeline without blocking the windscreen. The mount has been run in real cars for the listing photography, including a German saloon dash and a Japanese compact vent layout.

Full specifications

Why the SUNDAREE ring mount sells

• Low entry price, real product. From US$1.65 per unit at 10 pieces, it fits an impulse-buy band and still uses a private tool rather than a shared generic shell.
• Two colourways on one tooling. Black and silver grey cover both a dark and a light interior without a second mould cost.
• 60 g. Light enough that a vent blade carries it without sagging, which is the usual complaint about metal mounts at this price.
• Brandable ring face. The logo area is the most visible part of the mount, so a branding run looks deliberate rather than stamped on.
• Ten-piece samples. Test the print, the clip tension and the packaging before committing to volume.

OEM and ODM options

This is a private mould, so a branding run is the normal order: your logo on the ring face, a custom housing colour, and your own blister, window box or poly bag with your artwork. If you supply fleets rather than retail, we can pack the mount with a magnetic ring so it works on phones with no magnets built in, or as a kit with a car charger. Volume pricing, the print setup charge and current lead time come back within 24 hours of your enquiry.

Frequently asked questions about the SUNDAREE ring magnetic car phone mount

What is the difference between this mount and the other SUNDA vent mounts?

This is the lightest and lowest-cost ring mount in the range at 60 g. The zinc alloy mount uses a metal body and a double-lock clip for heavier phones, and the ABS ring-head mount is the version built for 100-piece minimum orders.

Which colour should I stock?

Black outsells silver grey in most markets because it disappears against a dashboard. Silver grey is worth carrying where the interior trim is light or where the product is photographed for a listing, because the finish reflects light.

Will it hold a large phone?

It holds from 4 to 7 inch, so a large phone in a case is fine. The load the vent blade sees is the weight of the handset plus the mount, and at 60 g the mount itself contributes very little.

Does the mount come with a magnetic ring for the phone?

A ring or plate is not included by default, because most buyers supply their own or order a MagSafe-compatible case. We can add a ring to the pack as an OEM item — say so on the enquiry and we will price it in.

Can I put my own logo on it?

Yes. The ring face is the print area. Silk-screen and pad printing are both available, and for larger volumes we can look at a moulded logo instead of a printed one.

What is the MOQ and how fast can I get samples?

MOQ is 10 pcs, and sample orders start there. Custom logo and packaging add a print setup step; send your artwork and the sales team will confirm the method and schedule within 24 hours.

Related SUNDA phone holders. This page covers one mount in the SUNDA holder range. If your order needs a different mounting type, the other models are the ABS ring-head vent mount, zinc alloy vent mount, foldable nano-suction mount and N52 vacuum-suction mount. For charging rather than holding, the M2 magnetic wireless car charger combines a magnetic mount with 15W Qi charging, and the CC53 / CC62 car charger series covers 30W to 140W. Buyers who range the whole category usually open with the phone holder category and the car charger category together.

Get a wholesale quote

The SUNDAREE ring mount is a private-mould part, so the housing colour, the logo print and the retail packaging can all be built to your brief. Send us your target quantity, destination market and artwork and we will come back with unit pricing from 10 pcs, the magnet and vent-clip specification sheet, packing options and the current production schedule. Contact the SUNDA sales team for samples, test reports and lead time.